Closed-space flight robot (industrial inspection drone system)
Category:
- Description
- Characteristics
- Configuration
-
Product Introduction
The enclosed-space aerial robot industrial inspection system is specifically designed for inspecting confined spaces in thermal power plants, making it suitable for typical environments such as boiler furnace chambers, cyclone separators, desulfurization towers, absorption towers, and chimneys. The system features an all‑enclosing carbon‑fiber cage structure that prevents crashes upon impact; it is equipped with LiDAR to enable precise positioning and autonomous obstacle avoidance even in GPS‑denied, low‑light conditions, while also supporting real-time 3D modeling from laser point clouds, thereby providing an accurate spatial digital twin of the inspected area.
Equipped with a 4K HD camera and an 80W high‑power fill light, defects are clearly visible. The cage‑type thickness‑measurement drone is fitted with an electromagnetic acoustic transducer (EMAT) thickness‑measurement module, which requires no couplant and can perform direct measurements on surfaces covered with loose dust or oxide layers. The system supports both tethered and battery‑powered operation, as well as dual‑mode communication via wireless and fiber‑optic links, enabling macroscopic inspection and thickness measurement of heated surfaces such as waterwall panels and superheaters, with digital handover at the end. No scaffolding is required, and personnel do not need to enter the area, ensuring safety and efficiency.
Category: Industrial Inspection Drones (Confined Space Detection)
Technical Specifications
OT200 Cage-Type Thickness Measurement Drone Technical Specifications
Parameter
Parameter value
Size
430×430×320 mm
Weight
1.9 kg (excluding power supply)
Power supply method
Tethered (≥4 hours) / Battery-powered (≥15 minutes)
Communication method
Wireless / Fiber Optic
Radar point cloud
200,000 pts/s
Camera
4K / 8 million pixels
Fill light
80W, stepless dimming
Robotic arm length
250mm
Robotic arm angle
Horizontal ±90°, Vertical ±90°
Onboard PC
8 cores @ 2 GHz / GPU with 1,024 cores @ 918 MHz / 16 GB / 100 TOPS (INT8)
Thickness measurement method
Electromagnetic Acoustic Transducer (EMAT)
Thickness measurement accuracy
±0.02mm
Maximum lift distance
2mm
Surface requirements
No need to clean or grind off surface dust/oxide layers, and no coupling agent is required.
Industrial-Grade Remote Controller Technical Specifications
Parameter
Parameter value
Size
346×196.5×89.4 mm
Weight
Approximately 1.5 kg
Processor
Qualcomm QCM6490 (8-core)
System
Android 14
Memory/Storage
8GB / 128GB (expandable via SD card)
Display screen
10.1-inch high-brightness touchscreen, 1920×1200
Operating frequency band
2.4G / 5.8G Dual-band Adaptive Frequency Hopping
Image transmission distance
Up to 30 km
Communication method
Fiber-optic / Wireless Dual-Mode
Interface
All types of interfaces, including fiber optic, Ethernet, serial, and SBUS
Battery capacity
20000mAh
Battery life
6–8 hours
Software platform (airborne and ground stations): Supports real-time monitoring (displaying flight status, inspection video, live point clouds, and thickness‑measurement data on the same screen), point‑cloud positioning, 3D visualization, one‑click reporting, backend management, and flight control (SLAM‑based autonomous navigation and obstacle avoidance in GPS‑denied environments, as well as pre‑planned route‑based automated inspections). It also enables data acquisition and transmission, bidirectional communication (dual‑mode: wireless and fiber optic), and onboard storage that ensures data persistence even in the event of a connection loss.
-
- Full-envelope carbon fiber cage structure to prevent crash upon collision.
- Without GPS, it achieves precise positioning and autonomous obstacle avoidance via LiDAR in dark environments, supports real-time 3D modeling of laser point clouds, and delivers accurate spatial digital twins.
- Dual power supply: Tethered mode draws power from the ground via cable for unlimited endurance, ideal for long-duration operations inside boiler furnaces. Battery mode offers ≥15 minutes of flight time with no cable restrictions.
- Supports dual communication modes: wireless and optical fiber. The fiber-optic mode ensures stable operation under strong electromagnetic interference.
- Equipped with a 4K high-definition camera and an 80 W high-power fill light for clear defect visualization.
- Electromagnetic Acoustic Transducer (EMAT) thickness measurement requires no couplant. Measurements can be taken directly on surfaces with floating dust or oxide layers, with a thickness accuracy of ±0.02 mm.
- Thickness measurement data is automatically mapped and annotated onto the 3D model, enabling simultaneous inspection and thickness gauging with digital deliverables.
- Capable of visual inspection of heating surfaces such as water walls and superheaters.
- Scaffolding-free operation; no personnel entry required for enhanced safety and efficiency.
- The software platform enables real-time flight monitoring, waypoint positioning, 3D visualization, one-click generation of inspection reports, and multi-period data overlay comparison, providing data support for maintenance decision-making.
-
Tethered Box Technical Specifications
Parameter
Parameter Value
Dimensions
380×270×172 mm
Weight
11kg
Input Voltage
AC 220V
Cable Length
50 m
Cable Management
Electric cable retraction and pay-out
Safety Protection
Overvoltage, overload, short-circuit and leakage protection
The XLX-01 tethered box connects to 220V mains power to continuously supply the drone, enabling long-duration uninterrupted operation and eliminating the endurance limitation of onboard batteries. It features an electric 50-meter cable retraction and pay-out mechanism that automatically deploys and retrieves the cable in sync with takeoff and landing, preventing tangling and wear while allowing convenient one-person operation. It integrates multiple protections including overvoltage, overload, short-circuit and leakage protection, provides regulated output and rapid power cut-off in the event of faults, ensuring the safety of equipment, personnel and the aircraft. Weighing only 11 kg, the unit integrates power supply, cable management and control into one portable system with a carrying handle, enabling quick deployment in power plants and other sites, making it suitable for high-altitude boiler inspection and similar scenarios.
Tag:
Related Products